Jerol Passive Signpost

Jerol Passively Safe Sign Posts

Fully tested and approved to BS EN 12767

Jerol Passive Signals

Designed to save lives

and reduce injuries.

Jerol Passive Signpost

Lightweight

Easy to install

PREV
NEXT

Passively Safe Sign Posts by Jerol

Jerol Passive HE SignpostsJerol sign and signal posts are extremely durable, a great electrical insulator, weather and
UV-resistant, plus boast a service life estimated to exceed 60 years!

 

Jerol HElix posts are classified to 70:HE:2 / 70:HE:1

HE or High Energy - The car is significantly arrested or slowed in an impact
70 kph rating - exit speed is less than 4 kph and may well be totally halted.
The HElix Jerol post is designed to bend around and flatten under the car bringing it to a relatively gradual halt. The post remains embedded in the ground and will not shear or break free. This ability to stop or almost stop a vehicle at medium speeds make them very suitable for town use to safeguard pedestrians.

  • Steel ground socket for easy replacement
  • Supplied in RAL 7023 grey, other colours available
  • Diameter 140mm with 70:HE:2 classification
  • Diameter 168 and 219mm with 70:HE:1 classification
  • Door and base compartment options
  • Fast and efficient installation
Jerol HElix Passive Range
Jerol Ground Socket

Foundation Socket

The best way to install Jerol posts is with our foundation socket, making installation and replacement quick and easy - in just one visit*.

To install, simply excavate to the required depth, lower the socket into position and back ll. Then insert the post into the socket and align with the supplied plastic wedges. Fill the socket with sharp sand and nish with a mortar cap.

Following an incident the socket remains in place allowing you to pull out the damaged pole and quickly install a replacement.

For posts requiring an electrical connection, we’ve designed our foundation sockets to be compatible with a variety of disconnection systems.

* Subject to appropriate ground and loading conditions.

Jerol NE Traffic Sign Post
Jerol Passive Safety

Jerol sign posts have been extensively crash tested to Passive Safety Standard EN12767 at Helsinki Technical University, one of the foremost test centres in Europe with full 3rd party accreditation.
Jerol Passive Singpost Film

So what are Jerol posts and why are they so good?

Jerol posts are manufactured in Sweden by a patented process from glass fibre composite, and comply fully with the latest European Standard on passive safety, BS EN12767. The process is fully computer controlled ensuring that the highest standards of quality control are maintained. All posts are designed and certified to fully comply with the wind load classification and relevant deflection criteria contained in BS EN 12899-1.

Jerol signposts are effective, easy to install and have already saved 1,000s of lives.

 

Jerol Cross Section

BS EN 12767 impact test at 70kph into a 219 diameter Jerol HE sign post

Interested?.
Find out more about how Jerol can save lives on your next project.

Name
Company
Email
Phone
Your message

© 2017 Mallatite Limited part of Hill & Smith Holdings PLC. All Rights Reserved. Terms & Conditions - Privacy Policy

Mallatite, Signature, Post + Column and Dee-Organ are the trading names of Mallatite Ltd. Company No. 2621328 VAT Registration No: GB 561200488
Mallatite (Oldbury & Inchinann) has been certified by BSI to ISO 9001, ISO 14001 & ISO 18001 under certificate numbers FM672639, EMS672643 & OHS672656
Registered Office: Hill & Smith Holdings Plc. Westhaven House Arleston Way, Shirley, Solihull, West Midlands, England, B90 4LH - Version 2.1
TOP