Jerol Passively Safe Sign Posts

Fully tested and approved to BS EN 12767

Designed to save lives

and reduce injuries.


Easy to install


Passively Safe Sign Posts by Jerol

Jerol Passive NE SignpostsJerol sign posts are extremely durable, a great electrical insulator, weather and
UV-resistant, plus boast a service life estimated to exceed 60 years!


Jerol NE posts are classified to 100:NE:2

NE or No Energy - The car loses minimal speed in the impact.
100 kph rating – exit speed is between 70kph and 100 kph in a 100kph test.
The NE Jerol post is designed to shear or breakaway on impact, and works best in the verges of motorways, dual carriageways and single carriageway roads.

  • Steel ground socket for easy replacement
  • Supplied in RAL 7023 grey, other colours available
  • Diameters 114, 140, 168, 219 and 273mm
  • Door and base compartment options
  • Fast and efficient installation

Doors and base compartment

If required a base compartment is provided, 1.0m above ground level. The door is manufactured from stainless steel and is powder coated to match the colour of the post. The aperture has a rubber seal and the door has a bonded foam lining to provide a watertight seal and good electrical insulation.
The standard door aperture is 800mm x 400mm.

Foundation Socket

The best way to install Jerol posts is with our foundation socket, making installation and replacement quick and easy - in just one visit*.

To install, simply excavate to the required depth, lower the socket into position and back ll. Then insert the post into the socket and align with the supplied plastic wedges. Fill the socket with sharp sand and nish with a mortar cap.

Following an incident the socket remains in place allowing you to pull out the damaged pole and quickly install a replacement.

For posts requiring an electrical connection, we’ve designed our foundation sockets to be compatible with a variety of disconnection systems.

* Subject to appropriate ground and loading conditions.

Jerol sign posts have been extensively crash tested to Passive Safety Standard EN12767 at Helsinki Technical University, one of the foremost test centres in Europe with full 3rd party accreditation.
Jerol Passive Singpost Film

So what are Jerol posts and why are they so good?

Jerol posts are manufactured in Sweden by a patented process from glass fibre composite, and comply fully with the latest European Standard on passive safety, BS EN12767. The process is fully computer controlled ensuring that the highest standards of quality control are maintained. All posts are designed and certified to fully comply with the wind load classification and relevant deflection criteria contained in BS EN 12899-1.

Jerol signposts are effective, easy to install and have already saved 1,000s of lives.


Jerol Cross Section

BS EN 12767 impact test at 100kph into a 219 diameter Jerol NE sign post

Find out more about how Jerol can save lives on your next project.

Your message