The units can be supplied to feature a brand name, logo or any design that may be required. Charge points are compact, self-contained units made from durable, weather-resistant solid stainless steel and they are low maintenance. Metering is located inside the charging unit, and the software can be reset and updated via remote control. ‘Smart’ model security is provided by key fob to enable charging and a connector lock with the type 2 socket version. The unit features optional usage reporting, for business users. Due to their simple design, units can be replaced in less than 10 minutes.
All our columns and posts can be made bespoke to your requirements, to make sure your EV Smart charging columns make a visual impact. We can also offer additional column protection units should you wish to safeguard your charge points from accidental vehicle collision.
- Attractive - Compact design
- Clear LED indicators
- Strong stainless steel construction
- Simple operation - plug ‘n’ charge
- OLEV approved
- Grant available subject to criteria
- Up to 7kw charging capacity
- IP65
- IK10
- Compliant to BS7671:2018
ELECTRICAL
Charge Current Rating Min 6A - Max 32A, Single phase
Charge Power Rating Min 1380W – Max 7360W
Supply Voltage 230VAC +10% -6% (216V – 253V)
Required Supply Rating 8A to 40A
EV CONNECTOR
Type 2 Socket Connector EN 62196-2 Type 2 socket with cover flap, ‘Smart’ & ‘e’ models
Lock ‘Smart’ model Locking socket
Can be used with any standard Type 1/2 to Type 2 cable - car universal
CHARGE MODE
Charge Mode 3 fully compliant
CHARGE POWER CONTROL
Maximum Charge Current Up to 32A ‘Smart’ model selectable to supply 16A or 32A
USER CONTROLS
Display 1 or 3 Bright Tri-colour LED display indicators
Displayed Information
SYSTEM Ready/Busy/Fault (depending on model)
APPROVAL Authorised/Pending
CHARGE Charging/Charged/EV Fault
Start / Stop ‘U’ model Optional via RFID fob
USER AUTHORISATION
Local ‘U’ model Optional via RFID fob
SAFETY FEATURES
EV supply disconnected until EV properly connected
RCD ‘Smart’ model Output protected by built-in Type A 30mA RCD
Charge Current Limiter - Charge current automatically limited to connected cable size (Cable size validation).
Cable Fault Detection - EV Cable automatically checked for faults
EVSE Fault Monitor - Auto fault monitoring of contactor operation, supply, output and charge point internal operation
EV Fault Monitoring - EV communication fault monitor
Charge Current Monitor EV charging current automatically monitored for under/over current conditions.
EV Supply disconnected for over current faults
MOUNTING OPTIONS
Wall Mounting option
Post mounting option offering a range of mounts to accommodate a number of standard post diameters and profiles.
Cable Entry Rear or bottom supply for standard 20mm cable gland
ENVIRONMENTAL
Enclosure Size 300mm H x 140mm W x 85mm D - Weight 3-4Kg
Environmental Protection Outdoor rated, protection to IP65
Vandal Resistance IK10
Operating Temperature -20oC to 55oC
Operating Humidity 10% to 100%
